Courses Available

CPCCPD3022: Apply paint by brush and roller

General information for the learner

Try / Demo

Information for the learner - CPCCPD3022

Try / Demo

Plan and prepare

Review work instructions to apply paint by brush and roller.

Try / Demo

Plan all work to meet relevant requirements

Try / Demo

Safety signs & lockout tags

Try / Demo

Barricades

Try / Demo

Select & check tools and equipment

Try / Demo

Environmental management site plan

Try / Demo

Plans drawings and specifications

Try / Demo

Safety requirements relevant to applying paint by brush and roller

PPE for painters

Try / Demo

Inspection of Work Sites

Try / Demo

Method of Identifying Hazards

Try / Demo

Working at Heights

Try / Demo

Selecting PPE - Dulux SDS Interpretation

Try / Demo

P1 and P2 mask selection, fitting, wearing and limitations

Try / Demo

Environmental requirements

Environmental requirements relevant to applying paint

Try / Demo

Reporting workplace environmental hazards

Try / Demo

Follow Workplace Plan to Improve Workplace Practices

Try / Demo

Workplace eco-efficiency audit - painting

Try / Demo

Prepare work area and materials

Prepare and locate materials ready for work

Try / Demo

Common Substrate Preparations

Try / Demo

Preparing Previously Decorated Surfaces

Try / Demo

Ensure application area remains free of dust and foreign matter

Try / Demo

General notes on substrate preparation

Try / Demo

Boxing Paint

Try / Demo

Calculating paint quantities from a plan

Try / Demo

Apply paint with brush or roller

Achieving required opacity,finish, texture and sheen

Try / Demo

Mixing and thinning paint

Try / Demo

Applicator system types, characteristics, uses and limitations: Brush and Roller

Try / Demo

Technical considerations

Mix and adjust coatings

Try / Demo

Understanding ratios

Try / Demo

Adhesion and cohesion

Try / Demo

Components of paint

Try / Demo

The paint drying process

Try / Demo

Conduct work with regard to heritage listed buildings

Try / Demo

Selecting a paint system

Try / Demo

Select brush, roller or brush/roller combination

Try / Demo

Paint coatings

Water-based paint

Try / Demo

Solvent based paint

Try / Demo

Two pack materials

Try / Demo

Applying two pack materials

Try / Demo

Water repellent coatings for timber

Try / Demo

Primers

Try / Demo

Sealers

Try / Demo

Undercoats/Intermediate coats

Try / Demo

Finish coats

Try / Demo

Tools and equipment

Paint applicator pads

Try / Demo

Roller sleeves and lengths

Try / Demo

Roller frames

Try / Demo

Brushware and accessories

Try / Demo

Dropsheets

Try / Demo

Paint pots and buckets

Try / Demo

Variances in work

Restoration

Try / Demo

Conservation

Try / Demo

Paint new or renovate and refurbish

Try / Demo

Tests

Wet film thickness tests

Try / Demo

Testing paint adhesion

Try / Demo

Testing for paint system compatability

Try / Demo

Testing for dirt, oil contamination, & chalking

Try / Demo

Common defects in coatings, and methods of rectification

Common causes of coating failure

Try / Demo

Picture Framing

Try / Demo

Causes of coating failure by the environment

Try / Demo

Causes of coating failure from poor preparation

Try / Demo

Causes of coating failure by the application process

Try / Demo

Surfactant leaching

Try / Demo

Clean up

House-keeping for painters

Try / Demo

Check & clean painting tools and equipment

Try / Demo

Storage and disposal of waste paint products

Try / Demo

Paint Wash Treatment Systems

Try / Demo

Storing paints and solvents safely

Try / Demo

Control measures for fire and explosion

Try / Demo

Hazardous chemical register

Try / Demo

Practical Activities

Practical Task 1 - Paint a room including ceiling

No Preview

Practical Task 2 - Paint a timber panel door - oil based

No Preview

Practical Task 3 - Paint a timber panel door - water based

No Preview

Practical Task 4 - Paint a flush door - oil based

No Preview

Practical Task 5 - Paint a flush door - water based

No Preview

Practical Task 6 - Paint a timber window

No Preview

Practical Task 7 - Paint a timber panel using 2 pack

No Preview

CPCCPD3022 Practical Task 1-7 Observation Checklist

No Preview

Apprentice Finalisation

Apprentice/Learner Declaration and Feedback

No Preview

Trainer Unit Completion Procedure

Trainer Sign-off 1 - Administrative/Compliance checks

No Preview

Courses Available

CPCCPD3022: Apply paint by brush and roller

Ammonite

Features

Site